Professional TPMS
Solutions
Vigilant Sentinel on Every Wheel
With over 20 years of firmware expertise and 8+ years of TPMS engineering,
NEX Sensor delivers professional-grade tire pressure monitoring.
Every second, our TPMS is watching over your driving safety.
Choose Your TPMS Solution
From universal OE-replacement sensors to advanced Bluetooth monitoring systems
NEX Universal TPMS Sensors
Direct OE replacement sensors. Pre-programmed with your VIN for 100% compatibility. Works with your vehicle’s existing TPMS system.
- check_circle 99.3% Vehicle Compatibility
- check_circle VIN Pre-Programmed
- check_circle Rubber & Metal Valve Options
NEX Bluetooth TPMS Sensors
Advanced Bluetooth sensors with 30M+ range. Connect directly to your smartphone. Perfect for vehicles without built-in TPMS.
- check_circle 30M+ Bluetooth Range
- check_circle Smartphone App Control
- check_circle Real-time Alerts
NEX BLE TPMS Monitor
Bluetooth Low Energy display monitor. Pairs with NEX Bluetooth sensors for a complete standalone TPMS system.
- check_circle Compact Display Unit
- check_circle Easy Dashboard Mount
- check_circle Audio & Visual Alerts
ORO W428 Universal Receiver
Universal TPMS receiver that works with your existing OE sensors. Perfect for older vehicles or replacing faulty OE displays.
- check_circle Works with OE Sensors
- check_circle Made in Taiwan (ORO)
- check_circle Multiple Display Modes
Quick Comparison
| Feature | NEX Universal | NEX Bluetooth | BLE Monitor | ORO W428 |
|---|---|---|---|---|
| Works with OE System | ✓ | — | — | ✓ |
| Smartphone App | — | ✓ | — | — |
| Standalone Display | — | — | ✓ | ✓ |
| VIN Pre-Programming | ✓ | — | — | — |
| Best For | OE Replacement | No Built-in TPMS | Pairs with BT Sensors | Older Vehicles |
Why NEX Sensor?
Our Support Makes the Difference.
Guaranteed Compatibility
We professionally pre-program every sensor using your vehicle’s unique VIN before shipment. This guarantees 100% compatibility and flawless communication with your car’s system.
Step-by-Step Guidance
We provide clear, complete, and vehicle-specific relearn instructions that make the setup easy for you or your technician. No more searching for information.
US-Based Expert Support
Our professional, US-based technical team is here to help. You’ll receive prompt, expert answers without worrying about time zone differences.
User Manuals & Guides
ORO W428 OE RX
Universal TPMS Receiver – Installation & Operation Manual
Made in Taiwan1 Package Contents
| Accessory | Qty |
|---|---|
| Receiver Display | 1 |
| Mounting Bracket (with 3M adhesive) | 1 |
| Cigarette Lighter Power Cord | 1 |
| User Manual | 1 |
Note: The company reserves the right to change accessories, appearance, and color. Actual product shall prevail.
2 Warnings
This is a low-power radio frequency device that has passed NCC certification. Without permission, no company or user is allowed to change the frequency, increase power, or alter the original design’s characteristics.
The use of this device must not affect flight safety or interfere with legal communications. Low-power RF devices must tolerate interference from legal communications or ISM equipment.
3 System Overview
The W428 OE RX is a wireless tire pressure monitoring system consisting of a receiver display. It utilizes your vehicle’s factory-installed tire pressure sensors to detect pressure and temperature inside the tires. This information is transmitted via radio signals to the receiver display, showing real-time data.
When an abnormal condition is detected, the display will flash and sound an audible alarm, providing early warning to address tire issues and help reduce accidents.
4 Specifications
| Receiver & Display Specifications | |
|---|---|
| Operating Voltage | DC 9V ~ 16V |
| Normal Operating Current | < 50mA |
| Storage Temperature | -30°C to 80°C |
| Operating Temperature | -20°C to 60°C |
| Pressure Display Range | 0 ~ 116 psi (0 ~ 8 bar) |
| Temperature Display Range | -30°C to 115°C |
5 Installation Guide
Important: Before installation, set the standard tire pressure values in the receiver’s factory settings menu. Default is 35 psi (2.4 bar). The system triggers a warning when pressure falls ≤80% or rises ≥130% of set value.
Note: Tire pressure naturally fluctuates with temperature. For every 6°C (10°F) change, pressure changes by ~1 psi (0.07 bar). This is normal physics.
Installation Steps:
-
1Assembly: Choose between standing mount or windshield mount configuration.
-
2Power Connection: Insert the cigarette lighter power cord into the power jack on the back. (USB port cannot be used for power supply)
-
3Mounting: Peel off the 3M adhesive backing and stick firmly. Adjust angle using the pivot screw.
-
4Final Power Up: Plug into vehicle’s cigarette lighter socket. Use the power switch on plug if socket doesn’t lose power when car is off.
-
5Placement: Install at least 20cm away from GPS, dashcams, or radar detectors to avoid interference.
Hardwiring Note: For fuse box connection, have a professional remove the cigarette lighter plug. Connect red wire to ACC power (synced with ignition), black wire to ground.
6 Operation & Settings
Button Controls:
Switch between display modes
Enter settings / Confirm selections
Display Modes (Brief press Left Button to switch):
- 1. Pressure Priority (Default): All 4 tire pressures, alternating voltage/temperature
- 2. Pressure & Temperature: All 4 pressures and temperatures simultaneously
- 3. Pressure & Voltage: All 4 pressures and vehicle voltage
Changing Settings (Hold Right Button 3 sec):
- • Front/Rear Standard Pressure: 24-80 psi (Default: 35 psi)
- • High Temperature Alert: 60-90°C (Default: 80°C)
- • Power-On Display Mode: Choose from 3 modes
7 Alert Modes
High/Low Pressure Alert
Trigger: Pressure ≥130% or ≤80% of standard value
Warning: Tire icon flashes, anomaly icon lights up, “beep, beep” sound
High Temperature Alert
Trigger: Temperature exceeds set alert value
Warning: Temperature value flashes, anomaly icon lights up, “beep, beep” sound
Low Battery Voltage Alert
Trigger: Vehicle voltage drops below 11.5V
Warning: Voltage value flashes
If consistently below 11.5V, have your vehicle inspected by a professional.
*To mute audible alarm: Hold Left Button for more than 3 seconds.
8 Tire Rotation & Sensor Replacement
The W428 has 5 preset tire rotation modes and 2 sensor replacement modes.
To access: Hold both Left + Right buttons for 3+ seconds.
Rotation Modes (1-5):
Select a rotation pattern, display shows new positions with green indicators. Hold Right Button 3 sec to confirm (hear “beep”).
Sensor Learning Modes:
Sequence: RF → RR → LR → LF
Rapidly inflate/deflate each tire (>4 psi / 0.3 bar change within 15 sec). “Beep” + green light = success.
Use original or approved equivalent sensor. Select tire position, then inflate/deflate as above.
NEX TPMS Wireless Programmer
Sensor Programming & Activation Tool – Quick Guide
Tool Overview
TPMS Tool Buttons
- (1) Status LED: Solid = Success, Flashing = In Progress
- (2) Power LED: Slow flash = On, Fast flash = Low battery
- (3) Activate Button: Activate sensors
- (4) Program Button: Program sensors
- (5) Power Button: Long press to turn on
- (6) USB Port: Charging & data transfer
- *Press (3)+(4) together to turn off
VCI Tool
(1) OBD II Connector: Connect to vehicle’s OBD II port for diagnostics and relearn functions.
Quick Setup (Uni-TPMS App)
Prerequisite: Enable Bluetooth and Location on your phone. Location is required for Bluetooth functionality.
-
1Install Uni-TPMS app on your phone
-
2Select your Language and Market
-
3Power on TPMS Tool, connect via Bluetooth (usually auto-connects as KA799-BLE_xxxx)
-
4TPMS icon turns GREEN when connected
Programming Sensors
-
1Enter TPMS menu
-
2Select: Market → Vehicle Brand → Model → Year
-
3Go to Programming tab
-
4Select Quantity of sensors
-
5Start programming. If errors occur, simply retry.
-
6Use Activation tab to assign wheel positions
Programming ID Options
Use already activated sensor ID
Clone ID from vehicle’s ECU
Enter custom ID manually
Auto-generate new ID
OBD Relearn Functions
Use the Learn tab with VCI connected to OBD II port:
- • Write ID: Write sensor RF ID to vehicle ECU
- • Read ID: Read current IDs from vehicle
- • Read Code: Read TPMS fault codes
- • Clear Code: Clear TPMS fault codes
NEX Bluetooth TPMS
Long-Range Bluetooth Sensors & BLE Monitor – Quick Guide
Overview
The NEX Bluetooth TPMS system provides 30M+ wireless range connectivity between sensors and your smartphone or BLE monitor display. Ideal for vehicles without factory TPMS or for monitoring spare/winter tire sets.
Quick Setup
smartphone Smartphone App Setup
- 1. Download TPMS app (iOS/Android)
- 2. Enable Bluetooth & Location
- 3. Open app and scan for sensors
- 4. Assign each sensor to wheel position
- 5. Set your preferred pressure alerts
monitor_heart BLE Monitor Setup
- 1. Mount display on dashboard
- 2. Connect power (USB/12V)
- 3. Monitor auto-pairs with sensors
- 4. Adjust alert thresholds as needed
- 5. Real-time monitoring begins
Key Features
- check_circle 30M+ Range: Extended Bluetooth range for reliable signal
- check_circle Real-time Alerts: Instant notifications for pressure changes
- check_circle Temperature Monitor: Tracks tire temperature alongside pressure
- check_circle Long Battery Life: 3-5 year sensor battery lifespan
Note: For detailed setup instructions specific to your vehicle and sensor configuration, please contact our US-based support team or visit the product page.